spiral jet mill 200 AS baseline for ultra-fine micronisation

200 AS BASELINE

Hosokawa Alpine has been setting the standards in the field of micronizing and dispersing of APIs for decades and became the preferred supplier of the big international pharma companies when it comes to milling technology and especially spiral jet mills.
The brand new SPIRAL JET MILL 200 AS BASELINE raises a well-known and proven technology onto a new level of ultimate cost efficiency, focusing on improved usability, clever design and full cGMP compliance.
The 200 AS BASELINE is available at an extremely attractive price range – compatible with your local market needs.

KEY FEATURES OF THE NEW 200 AS BASELINE
  • State-of-the-art design results in superior usability
  • cGMP design allows good cleanability with all relevant parts in AISI 316 L and FDA approval
  • Complete set of pharma documentation
  • Plug-and-play design for immediate use after delivery
  • Improved ergonomics
  • An innovative dosing system to feed the material directly from the raw material container
  • All that in a very compact design and at an affordable price
TECHNICAL SPECIFICATIONS
  • Chamber diameter – 200 mm
  • Gas pressure range – 2 – 8 bar (g)
  • Fineness range d50 – 1 – 40 μm
  • Nominal gas flow – 150 – 200 Nm³/h
  • Dimensions (l/w/h) (without aspirator) – 1.2×0.8×1.3 m
  • Power supply – 230 V; 2.2 kW
REFERENCE PRODUCTS

Celecoxib                     90% < 23 μm          33 kg/h
Nifedipine                   90% < 2.4 μm         8 kg/h
Progesterone              90% < 9 μm             20 kg/h
Diosmin                       90% < 4 μm             8 kg/h
Omeprazole                99% < 5 μm              3 kg/h
Cosmetic powder      90% < 10 μm            15 kg/h

 

Contact us for details or brochure

Recommended Posts
Showing 4 comments
  • MOHD ALIF ABDUL WAHAB
    Reply

    Hello, i would like to received brochure on spiral jet mill 200.

    • Hosokawa Micron Malaysia
      Reply

      Hello,
      We are sorry for the late reply. We believe our sales person has already email brochure of spiral jet mill 200 AS Baseline.

  • Eunhee
    Reply

    Hello, I would like to know the differences between 200AS and 200AS Baseline.
    Please provide the 200AS catalog for the comparison the specification of 200AS Baseline.

    • Reply

      Hi,
      Quick answer;

      200 AS Baseline
      A plug-and-play system and the customer only needs power supply and compress air. It is a standard equipment: no modification allowed.

      200 AS
      Not a plug-and-play. We can design the layout according to customer’s requirement – where to put the piping, etc. Not as automated as Baseline.

      We will email you few brochures for your reference.

Leave a Reply to Eunhee Cancel reply